PFPP-2 offers one hidden parking space in ground and another visible on surface, while PFPP-3 offers two in ground and a third one visible on surface. Thanks to the even upper platform, the system is flush with ground when folded down and vehicle traversable on top. Multiple systems can be built in side-to-side or back-to-back arrangements, controlled by independent control box or one set of centralized automatic PLC system (optional). The upper platform can be made in harmony with your landscape, suitable for courtyards, gardens and access roads, etc.
PFPP series are a kind of self parking equipment with simple structure, it moves vertically in the pit so people could park or retrieve any vehicle easily without moving other vehicle out firrst.It can make full use of limited land with convenient parking & retrieve.
-Both commercial use and home use suitable
-Three levels underground maximum
-Galvanized platform with wave plate for better parking
-Both Hydraulic drive and motor drive available
-Central hydraulic power pack and control panel, with PLC control system inside
-Code, IC Card and manual operation available
-2000kg capacity for sedan only
-Middle post sharing feature save cost and space
-Anti-falling ladder protection
-Hydraulic overloading protection
1. Could PFPP be used outdoor?
Yes. Firstly, the finishing of structure is Zinc coating with a better water-proof. Secondly, the top platform is tight with pit edge, no water dropping into pit.
2. Could PFPP series be used for parking SUV?
This product is designed for sedan only, the lifting capacity and level height can be available for sedan.
3. What’s the voltage requirement?
The standard voltage should be 380v, 3P. Some local voltages could be customized according to clients’ request.
4. Can this product still operate if electricity failure happens?
No, if electricity failure happens often in your place, you have to have a back-up generator to supply power.
1、Top quality processing
We adopt first class production line: Plasma cutting/robotic welding /CNC drilling
2、High lifting speed
Thanks to hydraulic driving mode, lifting speed is about 2-3 times faster than electric mode.
3、Zinc coating finishing
Total three steps for finishing: Sand blasting to delete rust, Zinc coating and 2 times paint spray. Zinc coating is a kind of water-proof treatment, so PFPP series could be used for both indoor and outdoor.
4、Sharing posts feature
When several units are installed side by side, the middle posts could be shared by each other to save land space.
5、Sharing hydraulic pump pack
One hydraulic pump will support several units to supply more power for each unit, so the lifting speed is higher.
6、Low electricity consumption
When the platform moves down, there is no power consumption, as the hydraulic oil will be driven back to tank automatically because of force of gravity.
|Vehicles per unit||2||3|
|Available car length||5000mm||5000mm|
|Available car width||1850mm||1850mm|
|Available car height||1550mm||1550mm|
|Available voltage of power supply||100V-480V, 1 or 3 Phase, 50/60Hz||100V-480V, 1 or 3 Phase, 50/60Hz|
|Safety lock||Anti-falling lock||Anti-falling lock|
|Lock release||Electric auto release||Electric auto release|
|Rising / descending time||<55s||<55s|
|Finishing||Powdering coating||Powder coating|
Beside the foundation, a separate maintenance manhole must be installed by the customer (with cover, ladder and passage to the pit). The hydraulic power unit and control box are also positioned in the pit.After parking, the system must always be kept to the lowest final position.If any side of the parking is opened to the ground, the safety fence around the pit parking is applied.
About the customized size:
If the size of the platform need to be customized based on customer require, dificulties might arise when entering or exiting the cars on the parking units. This depends on car type, the access and the individual driving behavior.
The position of the operating device depends on the project (switch post, house wall). From bottom of the shaft to the operating device an empty pipe DN40 with taut wire is necessary.
The installation is designed to operate between -30°and +40°C. Atmospheric Humidity: 50% at +40°C. If the local circumstances differ from the above please contact MuTrade.
Illumination has to be considered acc. to local requirements by client. Illumination in the shaft for maintenance is required to be minimum 80 Lux.
Regular maintenance by qualied personnel can be provided by means of an Annual Service Contract
Protection against corrosion:
Independent of a maintenance workings has to be carried out acc. to MuTrade Cleaning and Maintenance Instruction regularly. Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)! Pit must be always ventilated well.