Automated Roadway Stacking Parking System is a fully automated parking system developed by Mutrade, where the vertical movement and lateral movement of the vehicle is carried out by the stacker, and the longitudinal movement of the vehicle is implemented by the carrier to complete the storage and retrieval of the vehicle. There are two main types of carriers: comb tooth type and pinch wheel type.
Commercial grade design
Capacity of 2.35 tons capacity for sedan and SUV
6 levels above ground for both sedan or SUV
Driven by motor roller + wave pressure
High performance and safety
Flexible design: above ground, half ground and half underground, all underground
- High automation, instant treatment, continuous storage, high parking efficiency, can realize simultaneous access to vehicles
- Space saving, flexible design, diverse modeling, less investment, low spending and maintenance cost, convenient control operation etc.
- The use of several pumps ensures low noise level, high energy efficiency, and reliability
- Eco-friendness. No vehicle emissions, clean and green
- Supervision monitoring system: closed monitoring system, (control all parking system in the central control monitoring room); LED guiding monitor can show all orders and signals, such as over length, over width, over height, car position, operation moving process
- Vehicle theft and vandalism are no longer an issue and driver security is assured
- Easy operation: the final parking operation is fully automated reducing the need for staff
Car size(L×W×H) | ≤5.3m×1.9m×1.55m | |
≤5.3m×1.9m×2.05m | ||
Car weight | ≤2350kg | |
Motor power & speed | Lift | 15kw Frequency controlMax: 60m/min |
Slider | 5. 5kw Frequency controlMax: 30m/min | |
Carrier | 1. 5kw Frequency control40m/min | |
Turner | 2.2kw3.0rpm | |
Operation | IC card/ key board/ manual | |
Access | Forward in, forward out | |
Power supply | 3 phase/ 5 wires /380V/ 50Hz |
Scope of application
Automated parking systems are a modern and convenient way to solve many problems: there is no space or you want to minimize it, because ordinary ramps take up a large area; there is a desire to create convenience for drivers so that they do not need to walk on floors, so that the whole process occurs automatically; there is a courtyard in which you want to see only greenery, flower beds, playgrounds, and not parked cars; just hide the garage out of sight.
Automated Roadway Stacking Parking System mostly used in places with large parking capacity. Suitable for residential and office building and for public parking with ground layout, half ground half under underground layout or underground layout.